How to Code BFT Remote
How to Code BFT Remote (BFT Remote Programming Tutorial)
For over 22 years, Dezhak has been a trusted leader in installing and servicing automatic gates, parking gate operators, barriers, and rolling shutters. As an official partner of top Italian brands such as FAAC, Fadini, and BFT, we have successfully delivered thousands of projects across residential, commercial, and industrial sites.
One of the most frequent needs of our clients is understanding how to code BFT remote. BFT remotes are among the most widely used gate remotes in the world, and knowing how to program or reset them is essential for smooth daily use.
This guide provides you with everything you need: from BFT remote programming tutorial and how to set BFT remote, to BFT remote cloning, adding a new BFT remote, and solving common BFT remote coding problems.
Programming and Setup of BFT Remotes
How to Code BFT Remote (Programming BFT Gate Remote)
To start, press the receiver’s learning button until the LED indicator lights up. Then press and hold your remote’s main button until the receiver accepts the signal. Within seconds, your BFT remote will be coded and ready to use.
How to Set BFT Remote (BFT Remote Setup Tutorial)
If you are setting a remote for the first time, it’s important to ensure that the gate motor is powered and in standby mode. By following the BFT remote setup tutorial, you can configure the remote step by step, making it fully synchronized with the control board.
How to Copy BFT Remote (BFT Remote Cloning)
Need an extra remote? How to copy BFT remote is simple: place the new remote close to the working one, press the coding buttons simultaneously, and wait until the LED signals confirmation. This process is known as BFT remote cloning.
Advanced Functions and Troubleshooting
Resetting and Erasing Remote Codes
If your remote is malfunctioning, you may need to reset it. Reset BFT remote can be done by holding the coding button for 10–15 seconds until the LED flashes.
Sometimes, you may want to remove old or lost remotes. In this case, choose Erase BFT remote code on the receiver’s memory, which clears unwanted remotes from the system.
Adding and Adjusting Remotes
When you buy a new remote, you need to add it to the system. The process of Add new BFT remote is quick and ensures access for authorized users only.
For fine-tuning, you can also perform a BFT remote adjustment to optimize performance depending on the distance and environment.
Solving BFT Remote Coding Problems
Occasionally, users face issues with BFT remote coding problem—such as weak signal, interference, or synchronization errors. In such cases, our experts at Dezhak provide professional support to fix the problem on-site or remotely.
BFT Remote Coding Guide: Best Practices
Our BFT remote coding guide ensures that your remotes remain functional, secure, and user-friendly. Always use original BFT products, avoid exposing remotes to water or extreme heat, and update your system firmware when necessary.
Frequently Asked Questions (FAQ)
1. How do I program a new BFT remote?
Press the learning button on the receiver, then press your remote’s main button until the LED confirms the code.
2. Can I copy my BFT remote without the receiver?
Yes, in many models you can copy an existing remote using BFT remote cloning, but not all versions support this feature.
3. How do I reset a BFT remote?
Hold down the remote’s programming button for about 10 seconds until the LED flashes. This clears previous settings.
4. Why is my BFT remote not working?
Common issues include dead batteries, interference, or memory errors in the receiver. Reprogramming often fixes the problem.
5. Can I erase lost or stolen BFT remotes?
Yes, by accessing the receiver memory, you can erase BFT remote codes to ensure lost remotes no longer operate your gate.
Comments
Post a Comment